Gasho is proud to partner with AMETEK Dynamic Fluid Solutions to offer the ROTRON line of regenerative blowers. When your application requires high air pressures/vacuums, regenerative industrial blowers offer an effective solution that provides a variety of advantages.
How Regenerative Industrial Blowers Work
The design of a regenerative industrial blower is based on the regenerative principle. This involves the impeller blades passing the inlet port of the blower and drawing air or other gasses into the blower. Through centrifugal force, the impeller blades accelerate the air outward and forward. The regenerative principle occurs as the air is turned back by the annular shaped housing to the base of the following blades where it is again projected outward. More pressure to the air is imparted each time a re-generation occurs. A part of the blower located between the inlet and the outlet called the stripper section is where the annulus is reduced in size to fit closely to the sides and tips of the impeller blades. When the air reaches the stripper section, the outlet the air is stripped from the impeller and diverted out of the blower. The pressures or vacuums generated by the one or two spinning, non-contacting, oil-free impellers are comparable to those achieved by many larger multi-stage or positive displacement industrial blowers.
Regenerative Industrial Blowers Options
Three standard regenerative industrial blower options are available – industrial, chemical processing, and environmental blowers. Gasho can also develop customized solutions with explosion-proof motors, remote drive, and mag drive blowers. Depending on the application requirements, we have accessories available to complete your regenerative blower package solution.
Regenerative Industrial Blowers Advantages
ROTRON regenerative industrial blowers offer benefits such as quiet operation, maintenance-free design, and oil-free operation. Whether for industrial, chemical, or environmental applications, our regenerative industrial blowers are customized with specific coatings and other construction features to meet application requirements.