MD-Pneumatics Kinney® positive displacement blowers and boosters have a worldwide reputation for superior quality. Backing up that reputation for performance is their line of MD full synthetic lubricants. These lubricants are specifically formulated for use in MD-Pneumatics Kinney’s high-performing blowers and boosters.
Improper lubrication is one of the main causes of blower and booster failures. Specific formulation, especially in high-temperature conditions, enables MD lubricants to promote the highest quality of operation and a longer life over mineral oil or semi-synthetic lubricants.
MD Lubricants Benefits:
- Often operating at temperatures near 300°F, positive displacement blowers and boosters require a full synthetic lubricant that is blended to ensure maximum performance and product life.
- Allows for greater film strength at higher temperatures and decreased viscosities at low temperatures for minimal friction and better lubrication.
- MD full synthetic lubricants provide better rust and corrosion protection for increased equipment life and has the highest 1A rating for copper corrosion under ASTM D130.
- MD full synthetic lubricants contain a formulation of anti-wear and anti-foaming additives specially designed to extend the life of Tuthill blowers and boosters.
- MD full synthetic lubricants can last up to 5 times longer than mineral oil and twice as long as many semi-synthetic lubricants, meaning fewer oil change intervals, reduced downtime, and greater cost savings.
- MD full synthetic lubricants have an average oil life of 8,000 hours at temperatures up to 220°F compared with mineral oils that oxidize at temperatures as low as 160°F, for an oil life of 1,500 hours.
- MD lubricants substantially reduce power consumption by minimizing gear and bearing friction, resulting in improved efficiency.
Gasho is your source for MD-Pneumatics Kinney products and MD lubricants. Contact us today to discuss your project!