Gasho is proud to offer the MD-Kinney® line of rotary piston vacuum pumps from M-D Pneumatics Blower & Kinney Vacuum Solutions. This line of oil-sealed piston pumps covers a broad range of sizes in both single-stage and compound pump designs. The design of these rotary piston vacuum pumps gives them low blank off, high pumping speeds at low pressures and great durability.
Rotary Piston Vacuum Pump Features
KT Series Vacuum Pumps
The KT Series of rotary piston vacuum pumps are designed to provide unequalled durability in all types of applications, including dirty applications. Installation is simple, with no special preparation required.
- Full Pumping Speed Down to 1 Torr
- Operate Continuously at any Pressure up to 100 Torr
- Ultimate Pressure 10 Microns (McLeod Gauge)
- Quiet, Vibration-Free Operation
- No Metal-to-Metal Contact in Pumping Chamber
- Adjustable Gas Ballast Permits Handling of Condensable Vapors
KC Series Vacuum Pumps
The KC Series of two-stage vacuum pumps are designed to achieve lower pressures than can be reached with single-stage pumps. Features include unsurpassed durability, even when used in dirty application environments.
- Pumping Speed at Pressures Below 10 Microns. Lower than Attainable with Single-Stage Pumps
- Flows from 5 – 15 CFM (8 – 25.5 m3/h)
- Ultimate Pressure: .2 Microns (McLeod Gauge)
- Can Operate at Any Pressure up to Atmosphere
- Adjustable Gas Ballast Permits Handling of Condensable Vapors
- No Metal-to-Metal Contact in Pumping Chamber
- Air-Cooled
KTC Series Vacuum Pumps
The KTC Series of two-stage high vacuum pumps incorporates the “triplex” design, which includes a single shaft and three sets of cams and pistons, each set larger than the other. Pumps in this series maintain lower pressures than are attainable with single-stage pumps.
- Triplex Piston Design for Quiet, Vibration-Free Operation
- High Pumping Speed at Pressure Below 10 Microns, Lower than Attainable with Single-Stage Pumps
- Ultimate Pressure: .2 Microns (McLeod Gauge)
- Can Operate at Any Pressure up to Atmosphere
- Adjustable Gas Ballast Permits Handling of Condensable Vapors
- No Metal-to-Metal Contact in Pumping Chambers
- Unequalled Durability, Even in Dirty Applications
KD and KDH Series Vacuum Pumps
The KD and KDH Series are single stage vacuum pumps featuring a duplex design. A controllable gas ballast permits handling of condensable vapors and to minimize oil changes due to vapor contamination of the sealing oil.
- Full pumping speed down to 1 Torr
- Ultimate Pressure: 0.010 Torrv
- Can Operate at Any Pressure up to Atmosphere
- Adjustable Gas Ballast Permits Handling of Condensable Vapors
- No Metal-to-Metal Contact in Pumping Chamber
- KD pumps are air cooled; KDH pumps need water cooling for most applications
Rotary Piston Vacuum Pumps Product Listing
KT Series Vacuum Pumps (expand)
KC Series Vacuum Pumps (expand)
KTC Series Vacuum Pumps (expand)
KD and KDH Series Vacuum Pumps (expand)
Gasho will assist you in developing a rotary piston vacuum pump system that will best meet your specific application needs. Contact us to discuss your project.